What Is The String Inside A Robe For?

What are the uses of the extra string on the inside left portion of the robe? Usually, there are two sets of ties on a robe: one outside and the second inside the robe. The inner ties are used to prevent the robe from becoming open even when the outside or main ties are not tied.

The inside ties are secured first before those on the outside belt. These ties are also used to make the robe tighter for a more snugly fit. Both the inside and outside ties are therefore meant to keep the robe tightly around the body and where one set fails, the second set is there as a backup option.

Read Also: Why Do Robes Have Two Loops?

What is the string/tie inside a robe called?

This string is a rope-like or ribbon-like substance which is often worn along with certain Christian liturgical vestments, that encircle the body around or above the waist. When this cincture is tied in the front with its ends draped on either side, it is commonly called a Roman Knot.

Where does the string go on a robe?

The strings which are located on both the left and right sides of the robe go in opposite directions. This is to say that, those strings on the left go to the right while those on the right also go in the opposite direction.

In this way, the robe can easily be kept securely in place at all times. To do this effectively, take the left tie and cross it over the top of the right tie end.

Read Also: 5 Best Robes For Hot Tub In Winter To Check Out In 2022

After that, bring the end of the first tie under and through this cross, then pull both tie ends. One end will come out on the right while the other on the left.

How many strings does a robe have?

Usually, a robe is provided with two sets of strings, one on the left while the other one on the right. In each of these sets, there are also two strings with one a little above the other.

However, for some reason of fashion or aesthetics, there could be more, but whatever the case, there are functionally only two sets of strings in total and since each set has one string in it, a robe, therefore, contains two strings totally.

Read Also: Is It Weird To Go Outside In A Robe?

Do all robes come with strings?

Though most robes come with strings for keeping them in place on your body, there are still robes that do not have these strings.

In this case, the robes are provided with alternative means of keeping them securely tied such as with the aid of eyes, Velcro straps, loop belts or buttons. Therefore, not all robes come with strings on them.

How wide should a rope be before it can be used on a robe?

The standard length for robe ropes is about 2 7/8 inches, but the width depends on how you want it to be, while the standard width is about one-quarter inch to half an inch. You can make it either wider or narrower depending on your preferences.

Read Also: 5 Best Robes For Airbnb You Should Check Out In 2022

How do you use the extra string on the inside left side of the robe?

The string on the left inside a robe is meant to run right and be tied to the string on the right side before you tie the strings on the outside of the robe.

Doing this will prevent the robe from opening up should the main ( or outside) strings become untied accidentally. In essence, the string on the left side in a robe serves as a sort of backup to those strings outside the robe just in case.

Can I tie a robe without a string?

Most robes come equipped with strings that are meant to keep them closed after wearing. This of course does not imply that we can keep robes closed only by means of using strings since there are alternative means of doing that.

For example, some vintage robes do not come with strings but rather with hidden hooks and eyes inside them which basically serve the same purpose as the strings.

Read Also: What Can I Use Instead Of A Robe Belt?

This is particularly important with silk robes which are so slippery and hence can easily become untied. Additionally, Velcro straps, buttons and many other means are used in order to ensure that our robes stay closed unless we wish otherwise. So, basically, yes, you can tie a robe without strings.

How to tie a robe with inside string

  • To properly tie a robe with the inside string, gently use your hand to locate the hole around the seam. This is where the inside string is meant to pass-through
  • Once found, pass the string through the hole which is usually located below the armpit with your hand
  • Pull gently until it hugs your body perfectly
  • Then wrap the string around your body and tighten them

How do I keep a robe closed without the string?

To keep a robe closed without the strings can be easily done via hidden hooks and eyes by snapping them closed after wearing the robe since their parts on either side of the robe are so designed to close tightly when pressed together.

Other ways of doing this may involve bringing together the two surfaces of sewn Velcro straps on the inside of the robe which can function in much the same way as the strings.

Read Also: Do You Wear Anything Under A Bathrobe?

How do I replace robe strings?

The best way to replace either lost or damaged robe strings could involve getting ready-made strings of the same dimension and quality as that which needs to be replaced.

Alternatively, you can sew another string all by yourself, if you know how to use a sewing machine,  by cutting your materials according to all the necessary and exact dimensions of that string which you plan to replace.

Ensure that you sew the replacement string at exactly the same place on the robe where the previous string was. Also, be careful in making sure that you choose strings that are like-for-like in terms of quality with the string to be replaced to guard against any problems afterwards.

Are robe strings interchangeable?

Yes, they can be under certain circumstances. For example, make sure that the strings are of exactly the same dimensions and their materials are also very similar in every respect. In this way, you are not likely to face any difficulties afterwards.

Read Also: What Is The Bottom Of A Robe Called?  

How do you calculate belt loop length and width?

To make a belt loop, you must first precisely determine its width and length accurately. You should also know that the length of the belt loop is its width or waistband width plus two times its seam allowance.

In addition, you will also need a little bit of ease to account for the thickness of the belt and so you might want to add about 1/8 inch to make it less tight. As for the width, it is left for you to decide based on the appearance you want.

However, the standard width of a belt loop is about 1/4 to 1/2 inch and for that, you will require about four times the amount of your finished belt loop.

As regards the number of belt loops you will need, it depends on whether you are adding the loops to coats or dresses, and in that case, you will be needing two on each side seam at the waist.

Remember also that pants and skirts will usually require five belt loops: one at the centre back, two at the side seams and two in the front.

To make the process easy, sew multiple loops starting with one long strip of fabric which you will eventually cut into individual loops.

Therefore, calculate the width and length of each loop and multiply by the number of loops you are planning to make before cutting the fabric.

Button loops are an alternative to buttonholes which are commonly used on women’s clothes. One method is to use a soutache thread or elastic thread to make the button loops and another is by using thin fabric straps made with fabric strips or even a thin roulette fabric tube made from bias.

The last method is through making thread button loops with your sewing machine or even embroidery thread in the same colour as your fabric.

How do you sew the thread button loops?

Belt loops are both functional and decorative and they can be of different widths. They are typically made of the same fabric as that on which they are placed.

They can equally add colour and attraction to the fabric. They are very simple to construct and there are multiple ways of doing that. Additionally, they can also be added to even already completed garments or even those under construction with the same effect.

You will be shown the different ways by which you can easily accomplish that in this article. First,  where you are using the thread loops on the centre back, you are advised to bind the left and right sides of the centre back with a bias bonding.

While doing so, ensure that you mark the button loop replacement along the edges. Start by making a loop with thread and needle.

You can make up to ten thread loops, though even three or four will be adequate, it won’t be thick enough. The more repeats for the loops, the stronger and thicker the button loop is likely going to be.

After making the button loops, proceed to make the blanket stitches over the loop repeatedly too, from one side to the other.

How does one place the button loops?

After making the button loops on the centre back, it can expose the skin if you do not sew a separate fabric strip to the back which will conceal the skin underneath it since the loops are made on the edge.

Alternatively, you should plan the pattern in such a way that the side with the button loops will slightly overlap the other side.

You should also increase the centre back seat allowance by at least one inch to allow for extra overlap when buttoned and additionally, place the buttons to the inside as required.

Note that, the button loops are always stitched before the buttons. If you want the button loops very close, like in bridal gowns, you can arrange them two per inch.

How do you sew button loops with a facing?

First, mark the position of the loops and keep them to the inside on the right side of the pattern piece and thereafter, baste stitch each of them in place, lest they shift unduly.

After this, the machine stitches the loops along all the layers catching them. Then, fold in facing to the back in order for the loops to project outwards.

You may secure the facing by hand stitching it to the fabric, or if there is a lining, then to it instead of the fabric. Use a catch stitch that will give you some stretch and almost near invisibility from the outside too.

Finally, mark the placement for the buttons on the right side and stitch them in place. The left side should overlap the right.

What Is The String Inside A Robe For – Conclusion

A robe is such an item of impressive clothing whose uses and maintenance require special care for maximum benefits. Their materials and various parts should therefore be understood properly.

For this reason, one ought to consider the prevailing climate or weather conditions of a place before venturing to purchase a robe.

Similarly, the strings are another part of the robe which deserve special care and attention, especially considering the fact that you should be conversant with how to tie and untie them for more effective use of the garment.

Since the strings play a vital role in using a robe, they have been accorded great care too. For this reason, their replacement has been discussed in cases where they get damaged or lost.

Though most robes come with these indispensable strings, other alternative means of closing the robe have been analyzed as well. The strings of a robe are primarily meant to close it after wearing, but they have other uses too.

For instance, through the effective use of the strings, you can adjust the robe to your liking whether a little upwards or downwards.

In addition, you can determine how closely the robe fits you too, either loosely or tightly. Finally, these strings are in some instances used to hang the robe in the closet. It is believed the article is highly invaluable to all robe users.

Leave a Comment