Why Do Robes Have Two Loops?

Robes are garments worn either for bathing, dressing or wedding ceremonies. Notably, they mostly come provided with two loops which prompted the enquiry as to why they are commonly sewn with two loops.

Robes are provided with two loops mainly because you have to run the straps of the robe through it in order to tie your robe closely, particularly if you are sparsely dressed underneath.

These two loops are meant to enable you to choose where you wish to tie the robe. The upper loop can be used in cases where you wish to tie the robe higher up while the lower loop enables you to tie the robe further down.

Read Also: What Is The String Inside A Robe For?

Do all robes come with loops?

Most robes, no matter what purposes they are worn for, come sewn with two loops on them. This however does not imply that all robes have only two loops.

There are robes that come with more than two loops according to the fashion taste of their tailors, while others may not even have any at all,  in place of which alternative means for you to tie the robe are provided.

For instance, some robes come with a kimono-style collar, as is the shawl design too, though it all relies on how you want to be covered like it is found in the Terry bathrobe.

Which sides are the loops located in a robe?

Mostly, these loops are located on either the right or left side seam of the robe at the waist. Sometimes, these loops are placed on the centre back which can expose some skin, particularly where a separate fabric strip is not sewn to the back to conceal the skin underneath,  since the loops are made on the edge.

Alternatively, you can plan the pattern such that the side with the button loops will slightly overlay the other side.

Read Also: What Can I Use Instead Of A Robe Belt?

What materials are the loops made of?

Most loops are made from nylon,  which in most cases have different microfilament materials such as polyester and polypropylene embedded in them.

Are there robes with more than two loops?

Yes, there are. For instance, if you are adding belt loops to either coats or other dresses, you may require up to two loops on each side seam at the waist, since the belts may only be a decoration, which will make a total of four loops in all. Additionally, pants and skirts may require five belt loops: one at the centre back, two at the side seams and another two in the front.

Read Also: Is It Weird To Go Outside In A Robe?

How wide should a belt loop be?

The width of a belt loop is left for you to decide which is particularly dependent on the look you want. However, the standard width of a finished belt loop is around 1/4  to 1/2 inch.

In essence, you will need about four times the size of the finished belt loop which may give you a belt loop of about 1.5 inches wide for a finished 3/8 inch wide belt loop.

Which side does the string go on a loop?

In most cases, the strings on a loop are located on the inside of the robe on both the left and the right sides of the robe, each of which goes to the opposite side when you tie the robe. Therefore, each string goes to the side opposite it on the loop.

Read Also: 5 Best Robes For Airbnb You Should Check Out In 2022

Are there other uses of rope loops apart from running your strings through them to tie your robe?

Apart from their traditional use to enable you to tie the robe, the rope loops can also be used in hanging the robe on a clothes hanger to prevent it from sliding off.

In addition, the strings of a robe serve to prevent the robe from falling off you in the event that the outside or main ties are not tied well. They are also utilized in cases where we wish to make the robe fit us snugly.

Read Also: 5 Best Robes For Hot Tub In Winter To Check Out In 2022

What happens if my robe has no loops?

The loops in a robe are basically meant for you to tie the robe around yourself according to any requirement you may have based on your body stature or height. What alternatives are there, if at all, should your robe come without them.

In such instance, alternative methods of closing the robe include the use of Velcro straps, zippers or specially designed collars. Buttons are also commonly used in order to wrap the robes around you. However, the best and most suitable means of securing any robes around us remains through the use of loops.

Read Also: What Is The Bottom Of A Robe Called?  

Can a belt loop be sewn on a robe?

Yes, it can. To do this effectively, you can sew the exact size of the belt loop to the same centre back of the robe using a few stitches, which will secure it in place permanently as a panacea against any loss of the belt in future.

There are other various ways through which you can make fabric belt loops which you can stitch to your robe on the inside or alternatively, fold the seam allowances in and then press or topstitch and serge the raw edges by using fusible web to maintain them in place. So, yes, you can quite easily sew a belt loop to a robe.

How do you keep a robe closed without a belt loop?

Normally, there are two sets of ties to a robe: the main ties outside and the inside ties. If the belt loops inside ties are either damaged or lost, you can keep the robe closed by using the main ties outside and vice versa.

Furthermore, if the loops are either lost or damaged, you can keep the robe closed with the aid of Velcro straps, buttons or zippers sewn onto it.

Some vintage robes are known to have concealed eyes and hooks inside with which you can keep them closed. This is particularly relevant in the case of silk robes which can become undone easily since they are very slippery. Others have a hidden tie inside and where such is not found, the eye and hook will serve just as well.

Read Also: Do You Wear Anything Under A Bathrobe?

How does a bathrobe differ from a dressing gown and a robe?

The fundamental difference between a robe and a dressing gown is that a robe is a loose outer garment that symbolizes an honorary stature whereas a bathrobe is a robe made of terrycloth meant to be worn while one is still wet or damp from bathing or at such times when there is no immediate need to dress up fully. In essence, bathrobes are used when coming out of the bath or shower and are mostly designed using highly absorbent fabric but a dressing gown, unlike the other two, is used when getting dressed or while lounging around the house leisurely.

What do you call the rope on a robe?

This is a  rope-like or ribbon-like article that is most times worn along with other Christian liturgical vestments which encircle the body somewhere around the waist and is commonly called a cincture.

What are bathrobes used for?

A bathrobe is a casual, transitional cloth that is used after a bath or before one dresses up. It can also be used over pyjamas as an extra layer of clothing for additional warmth or as house clothes.

Bathrobes are usually made of terry cloth which are very absorbent and so can be used in place of a towel too due to this nature. Bathrobe materials are meant to aid the body in drying after a bath.

What do you call the string on a robe?

This string or rope-like ribbon is sometimes worn with other liturgical vestments too and it also envelopes the body around and above the waistline. If it is tied in front and its end draped on either sides, it is called a Roman Knot.

How do you tie a bathrobe?

Robes can be quite cosy and beautiful to put on but are not simple to wear especially when it comes to how we tie them. If they are worn wrongly, chances are they can suddenly slide open or the knots may look ugly,  which make robes a complicated piece of clothing.

To this effect, we shall walk you through the necessary steps to tie them up properly so they don’t give you any bother whatsoever.

First, slip your arms into the sleeves of the robe and settle it onto your shoulders evenly. Thereafter, wrap half of the robe around you, but towards the right. A tie or ribbon on its left edge or inside the right side of the robe will assist with this procedure.

Simply bring these two ties together and tie them up in a bow, thereby securing the left robe snugly to your body. Then, bring the right half of the robe around your body but towards the left and maintain it in place using your left elbow.

Afterwards,  take each end of the outer robe tie with one hand, which should lay flat against your body with no folds. From this stage, you should proceed to pass the left end tie and over the right end tie through the loop and then pass both ends tightly.

Read Also: What Do You Wear Under Bridal Robes?

The left tie end will be passing through the loop while the right end tie will go down through the bottom half of the loop. Fold the left end of the tie to enable it to hang directly next to the right end.

The left end should be to the right and both sash ends hanging beside each other. Using the left tie end, cross it over the top of the right end and bring the end of the first tie under and through this cross.

One end should come out each from both the left and right sides: the left from the right and the right from left. This will provide you with a smooth sash material covering the knotting while both ends come out from behind it. These is precisely the intricate movements you must execute properly before you tie the robe.

How do you make multiple loops in robes?

There are many procedures by which you can accomplish that, though the easiest of them all is to start with one long strip of fabric which you can later cut into individual loops.

Essentially, therefore, calculate the width and length of each loop and multiply these with the number of loops you plan to make and then proceed to cut your fabric accordingly. For the button loops, there are three different ways to make them.

Read Also: Can You Sleep In A Bathrobe?

Method 1

It is adjudged the easiest of them all and it involves the use of a soutache thread or Russian Braid, a simple decorative thread used for trimming.

Method 2

This involves using thin fabric straps made with fabric strips or thin roulette fabric tubes made from bias tape.

Method 3

This option requires the making of thread button loops using sewing machines thread or even by using embroidery thread of the same colour.

Why Do Robes Have Two Loops – Conclusion

In our contemporary lives, robes have multiple uses and are used in equally very different circumstances ranging from bathing, lounging at home, swimming and so on.

For this reason, we should not only know good ones but also how to use them properly and most satisfactorily. Consequently, we have not spared any effort in regaling you with information on how to tie up the robe around you most securely.

There is also the issue of the fabric or material from which the robe is sewn which is also important in how effective the robe is.  For instance, in all good and desirable robes,  the more absorbent the material is the better in terms of how effectively it dries your body.

How comfortable and satisfying these robes depend on a lot of factors too. For instance, one must not choose a tight-fitting robe that is likely to present you with all manner of discomfort.

These robes are secured or kept closed using loops and belts, which can easily get lost or damaged. For this reason, you have been informed on how to sew them personally at home when occasion demands through the provision of their correct widths and lengths as well as how to go about the sewing entirely.

Leave a Comment